How to Take Wrinkles Out of Polyester With Steam

Wrinkles-Out-of-Polyester-W

Polyester is one of the most durable, user-friendly fabrics you can find. While older versions of this fabric were known for being rough, new technology has made polyester softer and thinner. This is why the majority of your clothing, curtains and other types of home décor are typically made from polyester. One of the best things about this fabric is that a few wrinkles do not have to ruin your day since it doesn’t require expensive dry cleaning. Instead, you just need some hot water and expert fabric care tips to have your garment or home furnishings looking brand new again. To get started, choose one of these methods, and smooth those wrinkles away.

Use Your Steam Iron For Clothing
Unlike more delicate fabrics, polyester can be ironed using your normal home appliance. Begin by making sure that your iron’s internal reservoir has water. If not, fill it up. Then, set your iron to the lowest temperature setting that creates steam. While it heats up, turn your garment inside out. Place it flat on your ironing board, and use your hand to smooth out any bumps in the fabric. Once you have the garment ready, hold the iron one to two inches above the wrinkles. Move it slowly back and forth so that the steam relaxes the fibers of the fabric that are wrinkled. Once the wrinkles are removed, hang your garment up and let it cool. Avoid touching it until you are ready to wear it so that you do not introduce more wrinkles.

Steam Wrinkles From Home Furnishings
Drapes, table runners and other polyester décor are all likely to get wrinkles with every day use. Fortunately, you can use your handy steam machine to get those unsightly wrinkles out. If you have never used your steamer before, then read the included manufacturer’s guide. Once you are familiar with the machine, simply add water to the device before turning it on. Allow your steamer to heat up for a few minutes, then sweep the nozzle of the steamer over the fabric. For very stubborn wrinkles, hold the steamer in place for two seconds over the creases to make them relax. After steaming, let the fabric cool off so that the wrinkles stay gone.

Know How to Steam Without a Machine
There are times when you may need to improvise in a pinch. For example, traveling often leaves wrinkles in your clothes, and you may not have access to an iron. Alternatively, you may rarely use a steamer and not have one on hand. If this is the case, hang your garment or home furnishings in the bathroom on a rod or door where they will not get wet. Then, run a hot shower for 20 minutes or less while the door is shut. The weight of the garment will let gravity do its work while the steam relaxes the fibers to pull the wrinkles out.Polyester is one fabric that can be found everywhere, and anything made from it is meant to last. Yet, no fabric is truly wrinkle-free, and you will occasionally have to pull out the steam. Now that you know three methods for getting wrinkles out of polyester, just choose the one that works best for your garment so that it always looks freshly pressed.

Comments

comments